Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 31)

Publication IASIMP-QS015C-EN-P - August 2011 31
Hardware Selection Chapter 1
5. Add the current ArmorStart
devices on the three-phase network
to the control network.
a. Click the hardware tab.
b. Click the first ArmorStart
device and right-click the icon
of the ArmorStart device.
c. Choose ‘Connect channel...to
Network1:’ Control power
Armorstart’’.
The names of the ArmorStart
devices may be different.
6. Repeat step 5 for all of the ArmorStart devices listed under the hardware tab.
7. Click the network tab.
8. Select the Network view.
The network is displayed.
9. Click Run Wizard.