Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 35)

Publication IASIMP-QS015C-EN-P - August 2011 35
Hardware Selection Chapter 1
Once the validation process has completed, the following dialog box appears.
6. Click OK.
The ProposalWorks file created
(ArmorStart BOM) is now on the
respective directory.
7. Open Proposal Works.
8. From the File menu, choose Open.
9. Select ArmorStart BOM, then click Open.
10. Click Yes.
Your project is saved. If you click No, the
project is not saved.