Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 118)

118 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 6 FactoryTalk View Integration
In this example, the
controller is the CLX-L63.
b. Enter the desired Module/
AOI Name of the
intended ArmorStart
device you want to
monitor and control.
In this example, the
module name is
Motor_with_284. This
name was configured in
step 5 on page 118 .
c. Save your changes and
close this parameter.
5. Repeat step 3 to add parameter files for additional ArmorStart devices you intend to monitor and control.
6. Create a unique parameter name and assign the associated Device Shortcut and Module Name to the
parameter tagname.