Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 66)

66 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 3 ArmorStart DeviceNet Configuration
2. Expand the Communications tree
and select 1756-DNB.
3. Click OK.
4. In the New Modules dialog, enter
the module name.
5. Choose the node number and slot
number of where the DeviceNet
module resides in the controller
backplane.
6. Click OK twice.
A DeviceNet I/O module is
added to the I/O configuration tree.