Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 71)

Publication IASIMP-QS015C-EN-P - August 2011 71
ArmorStart DeviceNet Configuration Chapter 3
2. Expand the network tree.
3. Select your controller and click
Set Project Path.
If using serial communications,
verify that the 1756-CP3 cable
is connected between the
computer and the controller.
4. Click Download.
5. Click Download.
The project Path updates.
6. Move the keyswitch on controller to Run.
EtherNet/IP
Serial
EtherNet/IP
Serial