Chapter 5, Faceplate logix integration, Before you begin – Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit User Manual
Page 89: What you need, Chapter
Publication IASIMP-QS015C-EN-P - August 2011
89
Chapter
5
Faceplate Logix Integration
In this chapter you import pre-configured logic, referred to as an Add-On Instruction (AOI), into your
RSLogix 5000 application that integrates your ArmorStart device configuration with the ArmorStart
faceplate. This chapter also provides instructions on how to configure the Add-On Instruction to work with
the Equipment Status and ME Alarm History faceplates and how to integrate the Add-On Instructions into
your specific application logic.
Before You Begin
• Complete your system hardware selection (refer to
).
• Complete your system layout and wiring (refer to
).
• Configure your ArmorStart device (refer to
).
What You Need
• ArmorStart Accelerator Toolkit CD
.
• ArmorStart device.
• RSLogix 5000 software, version 17.0 or later.
• RSLinx Classic software, version 2.50 or later.
• RSLogix 5000 Start Page Resource Center for related Logix controller hardware and software manuals.
• The user manual for your ArmorStart device. Refer to
on
numbers.