Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 80)

80 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 4 ArmorStart Local Control Configuration
9. Click the Move/Logical tab.
10. Drag the BAND tag to the grid.
11. Drag the Net Input0 connection point
to the In1 connection point.
12. Click In1 again to make the connection.
The line will remain indicating that the
connection is made.
13. Repeat steps 10 to 12 connect the IO
Input0 tab to the In2 connection point.
14. Click and hold the Bit Output tab on the toolbar.
15. Drag the BAND
function block to the
left.
16. Double-click the ‘?’ in
the Bit Output tab.