Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 69)

Publication IASIMP-QS015C-EN-P - August 2011 69
ArmorStart DeviceNet Configuration Chapter 3
Download Controller File and Test ArmorStart Tags
Verify Tags
1. Go to the RSLogix 5000 editor and
double-click Controller tags from the
Controller Organizer window.
You’ll see generated input and output tags
for all of the devices that were added to the
scanlist.
For example, the tag name
Dnet_ArmorStart_Module_N04_POL
_I is for input tags for an ArmorStart
device located at node address 4. The
tag name
Dnet_ArmorStart_Module_N04_POL
_O is for output tags for an
ArmorStart device located at node
address 4.
These are the tags that correspond to
the parameters from the Produced IO
instance for the corresponding
ArmorStart device.