Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 18)

18 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 1 Hardware Selection
Adding a Three-phase Power Network and a Branch
You will now add a three-phase power network and a branch, add devices to a branch, configure the devices
and accessories for the device.
Add a Three-phase Power Network
1. Click the new network icon on the toolbar at
the top of the screen.
2. Select 3PhasePwr and click OK.
3. Enter a new network name.
4. Click OK.
5. From the Line Voltage pull-down menu,
choose 480V 60Hz.
Line voltage is the three-phase voltage
distributed by the three-phase network. You
can choose from three line voltages;
240V 60 Hz, 480V 60 Hz, and 600V 60 Hz.