Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 128)

128 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 6 FactoryTalk View Integration
4. Open and configure the
parameter file.
There is one parameter field
that must be defined.
5. Save the file once changes are
made.
Each Parameter (1…9) corresponds to the device AOI tag name of each Equipment Status Faceplate row
(1…9). You must assign the 1 parameter to a Pre-configured Device Faceplate AOI that includes the
Inp_NumRowsVis assignment that was configured in
Chapter 5 .
The remaining Parameters (2…9) must be assigned to valid Pre-configured Device Faceplate AOI tag names
for the Equipment Status Faceplate to operate without errors, even if corresponding Equipment Status
Faceplate Rows are not being used or assigned to non-preconfigured devices. We recommend you fill in the
non-used parameters with the last valid AOI tag name.
In this example, we are only using
one row, therefore, parameters
#1…3 are assigned to the
corresponding device AOI tags
that we wish to display in rows
#1…3. The remaining parameters
#4….9 are assigned to the #3 row
device AOI tag name
Motor_With_281 as a placeholder
for those faceplate objects in the
non-visible rows #4….9.