Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 159)

Publication IASIMP-QS015C-EN-P - August 2011 159
Logix Communication and Controller Configuration Appendix A
8. Move the controller keyswitch to PROG.
9. Compare the current firmware revision to the
latest revision listed.
If the current revision matches the newest
revision listed, then your controller has the
latest firmware and an update is not needed.
a. Click cancel.
The firmware upgrade is cancelled.
b. Go to Assign IP Addresses on page 160.
c. If the current revision does not match the
latest revision listed, click Next.
If you are unsure of which revision to use, select the latest version.
10. Click Finish.
11. Click Start.
The firmware update begins.
When the controller is updated, the status dialog box displays update complete.
12. Click OK.
13. Click Cancel.
14. Click Yes.
The ControlFlash software closes.