Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 139)

Publication IASIMP-QS015C-EN-P - August 2011 139
FactoryTalk View Integration Chapter 6
Test the Project
FactoryTalk View Studio software lets you create and test individual displays or the entire project, so that you
can navigate and test all the functionality before downloading your project to a terminal.
Follow these steps to test your FactoryTalk View Studio project.
1. From the Application menu, choose
Test Application.
2. If prompted to save changes, click Yes.
The FactoryTalk View Studio software compiles the project
and runs it as if it were executing on the desired terminal.
3. Test the functionality of the project and fix errors as necessary.
Disregard the following errors and
warnings. The Datalog feature is looking
for the logging path to Storage Card2 on
the PanelView Plus terminal.
4. Press Close [F3] to close this dialog box.
5. Press x on the keyboard to end testing and shut down the application.
IMPORTANT
To test run the project, all communication must be configured first.