Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 186)

186
Appendix C
Change a Numeric Parameter
To change a numeric parameter, follow these steps.
1. Select the desired parameter by completing steps
1…4 in Select a Parameter .
2. Press
in the given parameter.
3. Use the up
and down or numeric keys
to change the value.
4. Press
to accept the value.
This will highlight the parameter number again.
Change an Enumerated Parameter
To change an enumerated parameter value, follow these steps.
1. Select the desired parameter by completing steps
1…4 in Select a Parameter .
2. Press up
and down to change to the
appropriate value.
3. To edit any remaining parameters repeat steps
1…4 in Select a Parameter and use the appropriate method
for the data type to change them.
4. When finished, push
until you go back to the Who Screen or you may choose to move to a parameter
to monitor the status.