Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 79)

Publication IASIMP-QS015C-EN-P - August 2011 79
ArmorStart Local Control Configuration Chapter 4
When in Edit mode, the following
buttons appear for use in creating
the logic program.
3. Drag the Bit Input icon from
the Timer/Counter or Move/Logical
tab to the grid.
4. Double-click the tag and then click the
down arrow.
5. Click the ‘+’ next to Network Boolean.
6. Double-click Net Input 0.
7. Repeat steps 3 and 4 then click the ‘+’
next to Hardware Boolean Input.
8. From the Hardware Boolean Input,
select Input0.