Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 157)

Publication IASIMP-QS015C-EN-P - August 2011 157
Logix Communication and Controller Configuration Appendix A
Configure the EtherNet/IP Driver
1. Click the RSLinx icon in the system tool tray to start
the RSLinx Classic software.
2. From the Communications menu, choose
Configure drivers.
3. Select EtherNet/IP Driver from the
pull-down menu and click Add New.
4. Click OK to accept the default name.
5. Click Browse Local Subnet.
6. Highlight the IP address you just selected.
Click Apply, then click OK.
The EtherNet/IP driver is added to the
Configured drivers list.