Metrohm tiamo 1.0 Manual - Manual (Page 139)

Subwindow Run 115
Note
The fields Sample size and Sample size unit are always shown in one line horizon-
tally.
Process
Options for processing single determinations.
Method selection by assignment ID
on, [ off ]
[ ID1 ] ... ID8
If this option is switched on then the selected sample identification for the
method selection will be used. This identification contains the descriptive
Assignment ID that can no longer be edited. If this ID agrees with one of the
assignment IDs in the Sample assignment table then the corresponding
method will be entered in the field Method from this table.
Request assignment ID
on, [ off ]
If this option is switched on then the Assignment ID will be requested directly
after the start of the determination in the dialog window Sample assignment
(see Workplace - Tools - Sample assignment table - Sample assignment re-
quest).
Autorepeat determination
on, [ off ]
If this option is switched on then at the en of a determination the next de-
termination with the same method will be started automatically. In order to
stop the autorepeat the determination has to be stopped with
[Stop] .
Data import
Switches the import of external data on and off for the fields on the tab Single de-
termination .