Metrohm tiamo 1.0 Manual - Manual (Page 222)

198 Database
4.5.2 Properties
The properties of a control chart template can be set on the following 4 tabs:
• Graphical settings
Parameters for the graphical display for the control chart.
• Limits
Definition of warning and action limits for the control chart.
• Statistics
Shows statistics data for the control chart.
• Comment
Entry of comments for the template.
Graphical settings
Template name
50 characters
Name for the control chart template which is saved in the configuration da-
tabase per client.
Parameters for the graphical display of the control chart.
y Axis
Result
[ RS01] ... RS25
Selection of the result column whose value is to be shown on the y axis.
Label
25 characters, [ Result ]
Freely definable axis labeling for the y axis.
Background
Background color
Color selection, [ white ]
Selection of the background color for the control card.
Measured values
Shape
Symbol selection, [ z ]
Selection of the symbol for the display of the measured values.
Color
Color selection, [ blue ]
Selection of the color for the measuring point symbol.
Link measured values
on, [ off ]
If this option is switched on then the measured value points will be joined
together with a line.