Metrohm tiamo 1.0 Manual - Manual (Page 98)

74 General program functions
Assign position
The current rack, lift or swing head position can be assigned as a particular spe-
cial position.
Rack position
Assigns the current rack position to a particular special beaker.
Current position
Shows the current rack position.
Special beaker
[ 1 ] ... 16
Selection of the special beaker to which the current rack position is to be
assigned.
Trigger the assignment. During the assignment the cursor appears as an
hourglass.
Lift position
Assign the current lift position to a particular special position.
Current position
Shows the current lift position in mm.
Work position
If this option is enabled then the current lift position is assigned as the work
position of the tower, a special beaker or an external position of the swing
head.
Selection:
[ Tower 1 ], Tower 2 (not for 730 Sample Changer),
Tower 1+2 (only for 730 Sample Changer),
Special beaker 1...16,
External 1...4 (not for 730 Sample Changer)