Metrohm tiamo 1.0 Manual - Manual (Page 531)

Commands 507
Open the dialog window Call to enter a new call.
Note
10 calls can be defined at maximum.
Open the dialog window Call to edit the selected call.
Delete the selected call.
CALL - call
Call text
50 characters, [ 'empty' ]
Text for identifying the call. This text is displayed in the command.
Track name
Track names, [ 'empty' ]
Selecting the track to be called. All the normal tracks defined in the method
are selectable.
Condition
on, [ off ]
If this option is enabled, the call is only carried out if the condition is fulfilled.
1000 characters, [ 'empty' ]
The Formula editor to enter the condition(s) is opened with or by
double-clicking into the window.
LOOP
Command for the repeated execution of a command sequence. The loop can
be terminated after fulfilling different stop criteria.
Appearance
The command has the following appearance:
A LOOP command just inserted has got an arrow on the left hand side. A loop is
created by dragging this arrow to the desired command in the same track. De-
pending on whether the arrow has been dragged to a command before or after