Metrohm tiamo 1.0 Manual - Manual (Page 663)

Subwindow Titrants/Solutions 639
Note
Default values have already been entered for the tubing parameters; these cor-
respond to the dimensions of the standard tubing supplied. If you do not make
any alterations to the tubing connections then you do not need to alter the tubing
parameters.
Dosing tip
Length
0.0 ... [ 40.0 ] ... 999.9 cm
Length of the tubing connecting the cock to the dosing tip.
Diameter
0.0 ... [ 2.0 ] ... 9.9 mm
Diameter of the tubing connecting the cock to the dosing tip.
Cylinder
Length
0.0 ... [ 13.0 ] ... 999.9 cm
Length of the tubing connecting the cock to the cylinder.
Diameter
0.0 ... [ 2.0 ] ... 9.9 mm
Diameter of the tubing connecting the cock to the cylinder.
Reagent bottle
Length
0.0 ... [ 25.0 ] ... 999.9 cm
Length of the tubing connecting the cock to the reagent bottle.
Diameter
0.0 ... [ 2.0 ] ... 9.9 mm
Diameter of the tubing connecting the cock to the reagent bottle.
Exchange unit tubing connections
Reagent bottle
Dosing tip
Cylinder