Metrohm tiamo 1.0 Manual - Manual (Page 328)

304 Method
• KFT
Volumetric Karl Fischer Titrations.
• LIFT
Moving to a lift position.
• LOOP
Multiple execution of a command sequence.
• LQH
Extensive dosing possibilities with a Dosino.
• MEAS
Measuring.
• MET
Monotonic Equivalence Point Titrations.
• MOVE
Moving to a rack position or an external position.
• PREP
Preparing a exchange or dosing unit.
• PUMP
Switching on/off the connected or built-in pumps.
• RACK
Initialization of the rack attached.
• RECEIVE
Waiting for event messages or status messages.
• REPORT
Output of a report defined by a report template.
• REQUEST
Requesting sample data.
• SCAN
Scanning input lines.
• SEND
Sending event messages.
• SERIES END
Start command for Series end track.
• SERIES START
Start command for Series start track.
• SEQUENCE
Combining several commands to one command.
• SET
Set Endpoint Titrations.
• START
Start command for Main track.
• STIR
Controlling a connected stirrer.
• SWING
Swinging of the robotic arm (with Swing Head only).
• TRACK
Start command for Normal track.
• TRANSFER
Data transfer via RS232 to external devices.
• WAIT
Interrupt the method run.