Metrohm tiamo 1.0 Manual - Manual (Page 596)

572 Configuration
New version
Shows the new device program version to be loaded.
Loads new program version.
Note
Make sure that the device is not manipulated or switched off during the loading
process and follow the instructions shown.
Measuring inputs
Measuring input 1/2
ADC type
Shows the type of analog-digital converter.
ADC serial number
Shows the serial number of the measuring input.
Temperature sensor
[ Pt 1000 ], NTC
Selects the type of temperature sensor connected to the measuring input.
For an
NTC type temperature sensor two further parameters are visible:
R (25 °C)
1000 ... [ 30000 ] ... 99999 Ohm
Nominal resistance of connected NTC sensor.
B value
1000 ... [ 4100 ] ... 9999
Material constant of the NTC resistance referred to measuring the resis-
tance at 25 °C and 50 °C.
Note
Titrando models 2.8xx.0010 have only one measuring input.