E-flite Deuces Wild 25e2 ARF User Manual
Page 17
Advertising
17
E-flite Deuces Wild Assembly Manual
3. Position the servo between the blocks. Leave a small
gap between the servo and hatch to prevent the transfer
of vibration from the airframe into the servo. Use a pencil
to transfer the locations for the servo mounting screws
onto the servo mounting blocks.
4. Use a drill and 1/16-inch (1.5mm) drill bit to drill the
four holes for the servo mounting screws.
5. Apply 2–3 drops of thin CA into the holes to harden
the surrounding wood. This provides a hard surface for
the screws, making them more secure when installed.
Advertising