E-flite Deuces Wild 25e2 ARF User Manual
Page 37

37
E-flite Deuces Wild Assembly Manual
20. Use silicone adhesive to secure the air tank in the
fuselage. The air line between the air fill fitting and air
tank are connected using a T-fitting. Cut and attach a
3-inch (76mm) piece of air line to the fitting. Attach a
female quick disconnect to the 3-inch line coming from
the T-fitting and the retract air line. Attach a male quick
disconnect to the 3-inch (76mm) line coming from the
T-fitting and air tank air line.
Note: The air tank shown in the photos is not of the
correct size. The correct size air tank is included with
your retract package.
21. Use a hobby knife and #11 blade to trim the
covering to expose the opening for the main gear retract.
Trim the covering for the wheel well making a 1/8-inch
(3mm) overlap of covering from the inside edge of the
opening so it can be ironed down to add a clean finish
to your model.