E-flite Deuces Wild 25e2 ARF - Manual (Page 39)

39 E-flite Deuces Wild Assembly Manual
 26. Cut a 10-inch (254mm) piece of air line. Attach the
air line to the fitting on the main gear retract.
 27. Secure the main gear in the wing center section using
a #2 Phillips screwdriver and four 3mm x 8mm self-
tapping countersink screws.
 28. Remove the wheel from the fixed main gear using a
#2 Phillips screwdriver to loosen the screw that secures
the wheel collar. Use a drill and 3/16-inch (5mm) drill bit
to enlarge the hole in the main wheel.