E-flite Deuces Wild 25e2 ARF - Manual (Page 49)

49 E-flite Deuces Wild Assembly Manual
Power 32 Motor Installation
Required Parts
Motor w/X-mount (2) Spacer (8)
Motor nacelle (right and left)
4-40 x 1-inch socket head screw (8)
Required Tools and Adhesives
Phillips screwdriver: #2 Threadlock
Ball driver: 3/32-inch
Note: Using the Power 32 will provide you with
strong aerobatic performance. Due to the nacelle
design, installing the Power 32 takes more time as
you will need to assemble the motor to its X-mount
inside the nacelle. We have found it easiest to
accomplish this while the nacelle is pointing towards
the ground and holding the motor inside the nacelle
while we attach the X-mount. The X-mount should sit on
the back of the motor during this, providing you the
ability to install each screw one at a time.
 1. The Power 32 motor will require spacers be installed
between the mount and firewall. The image below
illustrates this installation as it is difficult to see this spacer
inside the engine nacelle when the motor is installed.