E-flite Deuces Wild 25e2 ARF - Manual (Page 44)

44 E-flite Deuces Wild Assembly Manual
 13. Secure the connector to the servo horn using a nylon
connector backplate. You may use side cutters to trim the
unused arms on the servo control horn.
Note: You will need your transmitter and receiver for the
next steps to set up your retract end points.
 14. Inside the radio programming menu of travel
adjustment, turn the travel adjustment down to 0 on both
sides of the gear channel. Set the control horn on the
servo where it sits at the neutral position as shown in the
photo. Install the servo horn on the retract servo.