E-flite Deuces Wild 25e2 ARF - Manual (Page 6)

6 E-flite Deuces Wild Assembly Manual
 2. Position the elevator servo in the fuselage. Use a pencil
to transfer the locations for the servo mounting screws to
the servo tray.
 3. Use a pin drill and 1/16-inch (1.5mm) drill bit to drill
the four holes for the servo mounting screws.
 4. Apply 2–3 drops of thin CA into each of the holes to
harden the surrounding wood. This will provide a harder
surface for the screws to bite into when installed.
 5. Secure the elevator servo in the fuselage using
the hardware provided with the servo and a #1
Phillips screwdriver.