E-flite Deuces Wild 25e2 ARF - Manual (Page 33)

33 E-flite Deuces Wild Assembly Manual
 7. Locate the steering cable and two crimps. Use side
cutters to cut the cable into two equal lengths. Slide a
crimp onto the cable, then pass the cable through the
outside hole of the nose gear steering arm. Slide the
cable back through the crimp and compress the crimp
with pliers to secure the cable. Attach a cable to both
sides of the steering arm at the outer most hole.
Note: You do not want any more than a 1/16-inch
(1.5mm) gap between the crimp and the aft portion of
the steering arm.
 8. Slide the steering cables into the pre-installed tubes
in the fuselage.
 9. Secure the nose gear in the fuselage using a #2
Phillips screwdriver and four 3mm x 8mm self-tapping
countersink screws.