E-flite Deuces Wild 25e2 ARF User Manual
Page 19
Advertising
19
E-flite Deuces Wild Assembly Manual
10. Secure the servo hatch to the wing using four 2mm x
10mm self tapping screws and a #1 Phillips screwdriver.
11. Slide a silicone clevis retainer onto a nylon clevis.
Thread the clevis onto the 4
1
/
4
-inch (108mm) aileron
pushrod wire.
12. Attach the clevis to the aileron control horn
center hole.
13. Use the radio system to center the aileron servo.
With the aileron in the center position, use a felt-tipped
pen to mark the pushrod where it crosses the hole in the
aileron servo arm.
Advertising