E-flite Deuces Wild 25e2 ARF User Manual
Page 42
Advertising
42
E-flite Deuces Wild Assembly Manual
5. Secure the retract servo in the wing using the
hardware provided with the servo and a #1 Phillips
screwdriver. The servo is installed with the output shaft
and horn towards the trailing edge of the wing.
6. Attach the actuator valve to the plywood valve mount
using the hardware provided with the valve.
7. Use medium CA to attach the valve mount as shown.
8. Use a T-fitting to connect the air lines from the main
gear. Attach a 3-inch (76mm) piece of air line to the
T-fitting. Use either side cutters or scissors to cut the air
line.
Advertising