E-flite Deuces Wild 25e2 ARF - Manual (Page 48)

48 E-flite Deuces Wild Assembly Manual
Power 25 Motor Installation
Required Parts
Motor w/X-mount (2) Motor nacelle (right and left)
4-40 x 1-inch socket head screw (8)
Required Tools and Adhesives
Phillips screwdriver: #2 Threadlock
Ball driver: 3/32-inch
 1. Attach the X-mount to the Power 25 motor using the
hardware provided with the motor and a #2 Phillips
screwdriver. Make sure to use threadlock on the screws to
prevent them from vibrating loose.
 2. Pass the wires from the motor through the gap
between the engine nacelle and firewall. The motor is
secured to the firewall using four 4-40 x 1-inch socket
head screws and a 3/32-inch ball wrench.
 3. Repeat Steps 1 and 2 to install the remaining motor.