E-flite Deuces Wild 25e2 ARF - Manual (Page 46)

46 E-flite Deuces Wild Assembly Manual
Hint: Try to keep the amounts equal for both up and
down. You may need to remove the servo horn and
adjust it on the servo shaft at least once during the
alignment process.
Aileron and Throttle Servo Extensions
Required Parts
Wing center section Y-harness (2)
9-inch (228mm) servo extension (2)
6-inch (152mm) servo extension (2)
Required Tools and Adhesives
Low-tack tape Dental floss
 1. Prepare the aileron servo extension by connecting two
9-inch (228mm) extensions to a Y-harness. The throttle
extension will require two 6-inch (152mm) extensions
and a Y-harness. Make sure to use string, dental floss,
or a commercially available connectors to secure the
extensions to the Y-harness.
Note: We used low-tack tape on each aileron extension
lead to differentiate it from the throttle extension.