E-flite Deuces Wild 25e2 ARF - Manual (Page 18)

18 E-flite Deuces Wild Assembly Manual
 6. Attach the servo to the servo mounting blocks
using the screws provided with the servo and a
#1 Phillips screwdriver.
 7. Remove the servo horn using a #1 Phillips screwdriver
and trim away any unused arms from the servo horn with
side cutters. Once complete reinstall the servo horn using
a #1 Phillips screwdriver. Use a pin drill and 5/64-inch
(2mm) drill bit to enlarge to outer hole in the remaining
servo arm as shown.
 8. Tie the string that has been installed in the outer wing
panel to the servo lead.
 9. Use the string to pull the servo lead through the wing
panel as shown.