E-flite Deuces Wild 25e2 ARF - Manual (Page 29)

29 E-flite Deuces Wild Assembly Manual
 10. Connect the clevis to the center hole of the nose
wheel steering arm.
 11. Slide the pushrod wire into the tube installed in the
front of the fuselage.
 12. Secure the nose gear in the fuselage using a #2
Phillips screwdriver and four 3mm x 8mm self-tapping
countersink screws.
 13. Use a #1 Phillips screwdriver to remove the nose
gear steering servo horn from the steering servo. Use
a pin drill and 5/64-inch (2mm) drill bit to enlarge the
outer hole of the steering servo horn.