Dako Autostainer - Manual (Page 101)

Dako Autostainer | User Guide 101
Section 18 | Reagent Tracking
Reagent Tracking allows you to monitor the total volume of each reagent that has been used on the
Autostainer. A Dako Autostainer Tracking Report can be generated to display various information
about all the reagents used on the instrument.
After each Autostainer run, the usage of each reagent is tracked on the Reagent Tracking
screen. The tracking system can maintain the following information: Reagent Name, Lot
number, Expiration date, total volume of reagent used, and total number of slides treated with
this volume.
Printing the Reagent Tracking Report
Printing the entire Reagent Tracking Report
1. Select the PRINT ALL button.
2. All reagents are printed on the Reagent Tracking Report.
Printing only selected reagents from the Reagent Tracking Report:
1. Select the desired reagent(s) to print onto the report by positioning the mouse pointer
over a reagent and clicking the left mouse button.
2. To select more than one reagent, repeat step one.
3. To de-select a selected reagent, position the mouse pointer over the highlighted reagent
and click with the left mouse button. The reagent will become un-highlighted, or de-
selected.
4. Once all desired reagents are highlighted, select the PRINT SELECTED button.
5. Only selected reagents are printed on the Reagent Tracking Report.