Dako Autostainer - Manual (Page 123)

Dako Autostainer | User Guide 123
Section 21 | Warnings and Symbols
Keep the cover closed during operation. The robotic arm will move unexpectedly during the
operation - stay clear.
Do not pour liquid down the Dako Autostainer sink. The Dako Autostainer is not equipped to
drain large liquid volumes poured at high speed.
Do not use bleach in the Dako Autostainer. Bleach may react with other chemicals and create
toxic fumes.
Do not impair the movement of the Dako Autostainer robotic arm in any way.
Remove caps from reagent vials before starting a run on the Dako Autostainer.
Place the slide racks in the down position before starting a run on the Dako Autostainer.
Place the reagent racks firmly in their seated position before starting a run on the Dako
Autostainer.
Hazardous reagent wastes must be disposed of according to local, state and federal
regulations. Wear appropriate Personal Protective Equipment to prevent exposure.
Do not use the scroll bars to select reagents from the reagent lists when setting up
subsequent runs while the Autostainer is in operation. Using the scroll bars during operation will
cause the Dako Autostainer to pause temporarily.
Do not use symbols when programming in reagents or protocols. Doing so may cause errors
during the run.
Do not multitask during operation. Multitasking is defined as running more than one software
application at a time (this includes the CD player and screen savers). This may lock up the Dako
Autostainer.
Do not print slide labels while the Autostainer is in operation.
Do not install third party software or hardware products. Installing third party products may lock
up the Dako Autostainer and may void the warranty.
Do not install screen saver. Installing screen saver may lock up the Dako Autostainer.
Do not make any hardware or software changes before consulting your local Dako representative.
(See Dako Companies and Distributors, Section 23)
Do not attempt to service the Dako Autostainer unless instructed to do so by an authorized Dako
representative. Doing so will void the warranty.
Do not relocate the Dako Autostainer System within your facility before contacting your local
Dako representative for vital information that may affect your warranty. (See Dako Companies and
Distributors, Section 23)