Updating a reagent lot number and expiration date – Dako Autostainer User Manual
Page 74
74
Dako Autostainer
|
User Guide
3. Display the specific reagent by selecting the scroll bar in the Reagent Name box or press
the UP or DOWN arrow key on the keyboard until the target reagent appears highlighted.
Press ENTER and the reagent information is displayed.
4. Select
the
DELETE button. A dialog box asks if you want to delete the selected reagent.
5. Select
the
YES button. The EDIT REAGENT LIST screen appears and the reagent is
deleted. Selecting the NO button displays the EDIT REAGENT LIST screen and the
reagent is not deleted.
6. Select
the
OK button. A dialog box asks if you want to save the changes made to the
reagent file. Select the YES button to save changes. Selecting the NO button deletes the
reagent. Select the CANCEL button to discard changes. The PROGRAMMING GRID is
displayed.
Updating a Reagent Lot Number and Expiration Date
1. From
the
PROGRAMMING GRID, select Edit lists on the menu bar. The reagent list
commands are displayed.
2. Select the reagent category. The corresponding EDIT REAGENT LIST screen is
displayed with the cursor in the Reagent Name box.
3. Display the specific reagent by selecting the scroll bar in the Reagent Name box or press
the UP or DOWN key on the keyboard until the target reagent appears highlighted. Press
ENTER or select the left mouse button and reagent information is displayed. Negative
controls are listed at the end of the primary antibody list. Use the list scroll bar or type
“_NC” and software moves the highlight to the negative control antibodies.
4. Highlight the current lot number displayed in the lot box. Type the new lot number and
the CHANGE button appears.
5. Press
the
TAB key to move to the Exp. Date box. Highlight the date displayed in the box
and type the new expiration date.
6. Select
the
CHANGE button. All fields are cleared.
7. Select
the
OK button or press ENTER until a dialog box prompts “Save changes on
disk?”
8. Select
YES to save the new lot number and expiration date.
Select the NO button and the reagent is not edited. The PROGRAMMING GRID is
displayed.