Dako Autostainer - Manual (Page 36)

36 Dako Autostainer | User Guide
2. Select the items to be included on the Program Grid. Any or all of the listed options can
be marked. Only checked items are displayed on the SLIDE INFO screen and the
Programming Grid.
NOTE: Selecting the Comment item creates a column for data entry on the Programming
Grid printout. This column is not displayed on the PROGRAMMING GRID.
NOTE: Slide ID, Block ID, Doctor, and Tissue items were selected to create this
Programming Grid example.
IHC Report
This function enables the user to select printing options for the IHC Report.
1. Select the IHC Report option by clicking on a raised diamond. Only one option can be
selected.
NOTE: The One case/page option prints one case on each page of the report.
The One slide ID/page option prints each Slide ID on a separate page.
The No page break option prints all slides for a run in a continuous print out.
2. Select the OK button to save the report options. The INITIALIZE screen is displayed.
Select the CANCEL button to escape without saving. The INITIALIZE screen is displayed
and the changes are not saved.
3. Select the OK button to save. The MAIN MENU screen is displayed.
Select the CANCEL button to escape without saving. The MAIN MENU screen is
displayed.
Custom Options
This function enables the user to select rinse and Slide Layout Map options.
1. Select any items to be made active by clicking the check box next to each option. If a
check is present then the option is activated.