Dako Autostainer - Manual (Page 35)

Dako Autostainer | User Guide 35
NOTE: The communication port for the printer is identified using the Port box on the
DESIGN SLIDE LABEL screen. The number displayed in the box must match the
computer serial port where the label printer is connected.
2. Select the OK button to save. The INITIALIZE screen is displayed.
Select the CANCEL button to escape without saving. The INITIALIZE screen is
displayed.
Printer Selection
1. To select the proper Seymour printer type on the DESIGN SLIDE LABEL screen, move
the mouse pointer over the down arrow to the right of the Printer box and press the left
mouse button. Scroll though the list using the keyboard arrows or the scroll bar. Select
the printer model and press the left mouse button or TAB.
NOTE: If the incorrect printer is selected, then error messages will appear on the screen
when slide or reagent labels are printed. To find the model number of your Seymour
Glass Label printer, check the cover of the printer for a number (ie.TPL2634). The last 4
digits represent the model number (i.e. 2642).
2. Select the OK button to save. The INITIALIZE screen is displayed.
Select the CANCEL button to escape without saving. The INITIALIZE screen is
displayed.
The Options Screen
The OPTIONS button is displayed on the INITIALIZE screen. This screen enables the user to select
format options for the Programming Grid, IHC Report; and customer options for rinsing, Slide Layout
Maps, and blow steps.
Program Grid
This function enables the user to select format options for the PROGRAMMING GRID.
1. Select the OPTIONS button. The OPTIONS screen appears.