Solving computer problems – Dako Autostainer User Manual

Page 116

Advertising
background image

116

Dako Autostainer

|

User Guide

Solving Computer Problems

Symptom

Possible Cause

Solutions


The computer will not turn on.


The computer is unplugged at
the power source.


Check the power cord
connections and verify the surge
protector is plugged in and
turned on.


Wall outlet is not working.


Ensure the wall outlet is
operational. Check also for a
blown fuse, or try using a
different wall outlet for the surge
protector.


Surge protector is not working.


Check to see if the circuit
breaker on the surge protector
is popped out. If so, then reset
by pushing it back in.


The computer turns on but
“Safe Mode” is displayed on all
four corners of the screen


The computer has been
improperly shut down.


Shut down the computer by
using the Windows “Start”
button located at the bottom left
corner of the screen and
selecting Shut Down. Note: This
button may be hidden requiring
you to drag the mouse pointer
off the bottom of the screen for it
to appear. Always shut down
the computer using this method.
Perform Scan Disk through
Windows
Explorer/Accessories/System
Tools/Scan Disk. For
assistance, contact your local
Dako representative.
(See Dako Companies and
Distributors, Section 23)

Advertising