Dako Autostainer Plus - Manual (Page 103)

Dako Autostainer Plus | User Guide 103
Section 18 | Reagent Tracking
Reagent Tracking allows you to monitor the total volume of each reagent that has been used on the
Autostainer Plus. A Dako Autostainer Plus Tracking Report can be generated to display various
information about all the reagents used on the instrument.
After each Autostainer Plus run, the usage of each reagent is tracked on the Reagent Tracking
screen. The tracking system can maintain the following information: Reagent Name, Lot number,
Expiration date, total volume of reagent used, and total number of slides treated with this volume.
Printing the Reagent Tracking Report
Printing the entire Reagent Tracking Report
1. Select the PRINT ALL button.
2. All reagents are printed on the Reagent Tracking Report.
Printing only selected reagents from the Reagent Tracking Report:
1. Select the desired reagent(s) to print onto the report by positioning the mouse pointer
over a reagent and clicking the left mouse button.
2. To select more than one reagent, repeat step one.
3. To de-select a selected reagent, position the mouse pointer over the highlighted reagent
and click with the left mouse button. The reagent will become un-highlighted, or de-
selected.
4. Once all desired reagents are highlighted, select the PRINT SELECTED button.
5. Only selected reagents are printed on the Reagent Tracking Report.