Dako Autostainer Plus - Manual (Page 37)

Dako Autostainer Plus | User Guide 37
NOTE: Selecting the Comment item creates a column for data entry on the Programming
Grid printout. This column is not displayed on the PROGRAMMING GRID.
NOTE: Slide ID, Block ID, Doctor, Tissue, and Comment items were selected to create
this Programming Grid example.
IHC Report
This function enables the user to select printing options for the IHC Report.
1. Select the IHC Report option by clicking on a raised diamond. Only one option can be
selected.
NOTE: The One case/page option prints one case on each page of the report. The One
slide ID/page option prints each Slide ID on a separate page. The No page break option
prints all slides for a run in a continuous print out.
2. Select the OK button to save the report options. The INITIALIZE screen is displayed.
Select the CANCEL button to escape without saving. The INITIALIZE screen is displayed
and the changes are not saved.
3. Select the OK button to save. The MAIN MENU screen is displayed.
Select the CANCEL button to escape without saving. The MAIN MENU screen is
displayed.
Custom Options
This function enables the user to select rinse or blow options, to modify the Slide Layout Map or to
disable the Bar Code feature.
1. Select any items to be made active by clicking the check box next to each option. If a
check is present then the option is activated.
Delayed Start Water Rinse:
For a delayed start, idle rinses may be performed with water or buffer. Select the Delayed
Start water rinse option to use water. If this option is not checked then idle rinse will be
with buffer (deionized water is not available with the “01” hardware version of the Dako
Autostainer Plus).