Dako Autostainer Plus - Manual (Page 30)

30 Dako Autostainer Plus | User Guide
Deleting Doctor Information
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed with
the cursor in the Name box and the previously entered information listed.
2. Press ENTER or TAB key until the cursor flashes in the Doctors box.
3. Select a doctor from the current list of doctors.
4. Press ENTER. A dialog box appears asking if you want to delete the selected doctor.
5. Select the YES button. The selected doctor is deleted from the current list and the
INITIALIZE screen appears.
Select the NO button and the INITIALIZE screen is displayed and the highlighted doctor is
not removed from the list.
Entering Tissue Information
Adding a New Tissue
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed with
the cursor in the Name box and the previously entered information listed.
2. Press ENTER or TAB key until the cursor flashes in the Tissue box.
3. Type in the tissue and press ENTER. A dialog box appears asking if you want to add the
current tissue to the list.
4. Select the YES button. The INITIALIZE screen appears and the newly entered tissue is
added to the list.
Select the NO button. The INITIALIZE screen is displayed and the information is not
saved.
NOTE: To edit a tissue, first delete the tissue, then enter the new information.
Deleting a Tissue
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed with
the cursor in the Name box and the previously entered information listed.
2. Press ENTER or TAB key until the cursor flashes in the Tissue box.
3. Select a tissue from the current list of tissues.
4. Press ENTER. A dialog box appears asking if you want to delete the selected tissue.
5. Select the YES button. The selected tissue is deleted from the current list and the
INITIALIZE screen appears.
Select the NO button and the INITIALIZE screen is displayed and the highlighted tissue is
not removed from the list.
Entering Default Reagent Information
Assigning Default Reagent Dispense Volumes
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed.
2. Select a default reagent volume by clicking on a raised diamond next to the appropriate
volume. A smaller black diamond appears next to the selected volume.
3. Select the OK button to save. The MAIN MENU screen is displayed.