Dell PowerEdge M820 (for PE VRTX) - Manual (Page 114)

Error Code Message Information
PCI2002
Message A fatal IO error detected on a component at slot <number>.
LCD Message Fatal IO error on slot <number>.
Details System performance may be degraded, or system may fail to
operate.
Action Cycle input power, update component drivers, remove and
reinstall the device.
PCI3000
Message Device option ROM on embedded NIC failed to support Link
Tuning or FlexAddress.
Details Either the BIOS, BMC/iDRAC, or LOM firmware is out of date
and does not support FlexAddress.
Action Update BIOS, BMC/iDRAC, and LOM firmware. If the issue
persists, see
Getting Help .
PCI3002
Message Failed to program virtual MAC address on a component at
bus <bus>device<device>function <func>.
Details Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of
date and does not support FlexAddress.
Action Update BIOS, BMC/iDRAC, LOM, and PCIe mezzanine card
firmware. If the issue persists, see
Getting Help .
PCI3004
Message Device option ROM on PCIe mezzanine card <number>
failed to support Link Tuning or FlexAddress.
Details Either the BIOS, BMC/iDRAC, or PCIe mezzanine card
firmware is out of date and does not support FlexAddress.
Action Update BIOS, BMC/iDRAC, and PCIe mezzanine card
firmware. If the issue persists, see
Getting Help .
PCI3006
Message Failed to get Link Tuning or FlexAddress data from iDRAC.
Details Either the BIOS or BMC/iDRAC firmware is out of date and
does not support FlexAddress.
Action Update BIOS, and BMC/iDRAC firmware. If the issue persists,
see
Getting Help .
PCI3008
Message A non-fatal PCIe error detected on a component at bus
<bus>device<device>function <func>.
Details System performance may be degraded.
114