Dell PowerEdge M820 (for PE VRTX) - Manual (Page 134)

Error Code Message Information
Details PXE is one way to boot a system from the network.
Action Check the network and PXE server configuration.
SEL1306
Message Invalid boot sector found.
Details The disk in the drive is not formatted correctly or does not
contain the necessary operating system files.
Action Replace diskette with a bootable disk.
SEL1308
Message A time-out occurred while waiting for user to select a boot
source.
Details The system has failed to boot to an operating system and
needs the user to select a boot source.
Action Select boot source within the time allowed.
SEL1501
Message Chassis management controller (CMC) redundancy is lost.
Details An action or failure has taken place that breaks CMC
redundancy.
Action Check the CMC network cables and network connections.
Check that CMC firmware versions match.
SEL1502
Message Chassis management controller (CMC) redundancy is
degraded.
Details An action or failure has taken place that breaks CMC
redundancy.
Action Check the CMC network cables and network connections.
Check that CMC firmware versions match.
SEL1504
Message The chassis management controller (CMC) is not redundant.
Insufficient resources to maintain normal operations.
Details There is not enough available power for two CMC's to
operate.
Action Check the overall power consumption and power status.
SEL1506
Message Lost communications with Chassis Group Member
<number>.
Details The primary CMC has lost communication with the indicated
member CMC.
134