Dell PowerEdge M820 (for PE VRTX) - Manual (Page 66)

3. tabs (2) 4. connector
Installing the storage controller card
1. Holding by its edges, position the storage controller card so that the card-connector aligns with the
system board connector.
2. Adjust the other end of the card so that the card edge is secured to the bracket.
The storage controller card is secured under the tabs on the support bracket.
3. Insert the card connector firmly into the system board connector until the card is fully seated.
4. Install the two screws to secure the storage controller card to the system board.
5. Reinstall the system board.
6. Install the server module in the enclosure.
66