Dell PowerEdge M820 (for PE VRTX) - Manual (Page 115)

Error Code Message Information
Action Cycle input power, update component drivers, remove and
reinstall the device at the next service window.
PCI3010
Message A non-fatal IO error detected on a component at bus
<bus>device<device>function <func>.
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and
reinstall the device at the next service window.
PCI3012
Message The QuickPath Interconnect (QPI) width degraded.
Details System performance may be degraded. The bus is not
operating at maximum speed or width.
Action Reset the system, if the problem persists reinstall processors.
PCI3014
Message A non-fatal PCIe error detected on a component at slot
<number>.
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and
reinstall the device at the next scheduled service time.
PDR0001
Message Fault detected on drive <number>.
LCD Message Fault detected on drive <number>. Check drive.
Details The controller detected a failure on the disk and has taken
the disk offline.
Action Remove and re-seat the failed disk. If the issue persists, see
Getting Help .
PDR0002
Message A predictive failure detected on drive <number>.
Details The controller received a SMART error from the drive. The
drive is operational but needs replacement.
Action The drive will need replacement at the next service window.
PDR0016
Message Drive <number> is removed.
LCD Message Drive <number> is removed. Check drive.
Details The controller detected a drive removal.
115