Dell PowerEdge M820 (for PE VRTX) - Manual (Page 148)

Error Code Message Information
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0218
Message The <name> voltage is less than the lower warning
threshold.
LCD Message The <name> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0219
Message The <name> voltage is less than the lower critical threshold.
LCD Message The <name> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0220
Message The <name> voltage is greater than the upper warning
threshold.
LCD Message The <name> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
148