Dell PowerEdge M820 (for PE VRTX) - Manual (Page 125)

Error Code Message Information
Details The user-defined power settings have affected system
operation.
Action If unintended, review system configuration changes and
power policy.
PWR1006
Message The system halted because system power exceeds capacity.
LCD Message System power demand exceeds capacity. System halted.
Details The system halted because system power exceeds capacity.
Action Review system configuration, upgrade power supplies or
reduce system power consumption.
PWR1007
Message The system performance degraded because power exceeds
capacity.
LCD Message System power exceeds capacity. Performance degraded.
Check PSU configuration.
Details The system is currently operating in a performance degraded
state to attempt protect from a power shutdown.
Action Review system configuration, upgrade power supplies or
reduce system power consumption.
PWR1008
Message The system performance degraded because power draw
exceeds the power threshold.
LCD Message System power exceeds threshold. Performance degraded.
Check PSU configuration.
Details The power threshold is configured by the user or
automatically by software based on system configuration.
Action Review system configuration, upgrade power supplies or
reduce system power consumption.
RFM1003
Message Removable Flash Media <name> is not IPMI-function ready.
Details The removable flash media is installed but improperly
configured or failed to initialize.
Action If unintended, reinstall the flash media and module.
RFM1005
Message Removable Flash Media <name> is not ready.
Details The media is being prepared or is under maintenance. If the
problem persists, reinstall the card.
125